DIY standing-seam metal roof installation - to someone experienced in the industry, odds are these words would sound ludicrous. The fact is, there have been a lot of people trying of late, and a lot of people failing. The motivation of these would-be MacGyvers is obvious enough - they’re hoping to make a saving on the metal roofing contractor they won’t need to hire, followed by the further savings in terms of electric bills and insurance policies that having a metal roof puts you in for.
While the frugal thinking that informs these efforts is admirable, there are a lot of good reasons you should find some other way to diminish your metal roofing costs. While there are a few companies out there that make metal roofing shingles specifically designed for the amateur to install (from panels that pretty much clip together by hand to those requiring little more than the standard tool arsenal of screw gun, hammer, metal snips, caulk gun, and tape measure) these uniformly shaped shingles will only work on homes with a very regular roofing structure.
And uniform is not how you’d describe the roofs of most residential buildings. With only an inadequate mix of personal DIY tools not even resembling the specialized efficacy of a metal roofing contractor’s arsenal, you’re going to leave weak spots around irregularities like chimneys, skylights, sidewalls, gables, dormers and unusual angles. Any of these weak spots could be what lets the intrusion of rain, frost and snow into your home, with the long term damage that accompanies them. And so, instead of coming into possession of the roof that could have outlasted your earthly existence, you’ll find yourself in the unfortunate position of needing to either stage another attempt, or swallowing your pride and calling on the services of, you guessed it, a trained, professional metal roofing contractor.
Unless you live in an A-frame or some kind of featureless box of a home, getting a metal roofing contractor in on the action is often the best thing to do. Since installing a metal roof is relatively easy (the panels are so lightweight and require so little work to fit together) your contractor is probably not going to need as much time as he would take on an ordinary, clay and fiberglass job, and thus, since most contractors charge by the day, will most likely charge you much less.
You should ensure that your contractor intends to use a brake, the name for the portable hydraulic cutting tool employed by roofers to shape irregular roof panels on site. If he doesn’t, odds are the job will stretch out far longer than necessary, costing you more and leaving parts of your roof open to the elements. In the long term, hand cut panels are also likely to be poorly shaped, reducing the visual effect of your roof.
The best tool for cutting and shaping metal roofing panels on-site is called a brake, and you need to make absolutely sure that your metal roofing contractor is using one, as without it you’ll be left with poorly-cut panels and a job that stretches out far longer than it should. The hydraulic powered teeth of the brake cut panels perfectly without deforming their ends, leaving you with the neatest, most aesthetically appealing roof-shaping you could hope for.
Learn more about Metal Roof Installation and Metal Roofing Contractors at DurableMetalRoofs.com.
- Ryan McCall